LYQ-1800双锁紧桥式切石机<br>
本机采用大跨度横梁结构, 整体机身重; 横梁导轨采用进口线性轨道; 机身升降结构采用四立柱式液压升降, 同时采用**技术: 立柱及边梁，在切割时有液压锁紧装置，确保切割时整体机身不晃动, 切割效率好, 板材平整度高, 是切割大规格高价值进口大荒料的理想设备.<br>
1: 机身采用**技术&quot;液压锁紧装置&quot;，在机械有磨损或切割过程中可减小机身间隙，有利于提高板材的平整度和延长刀头使用寿命。<br>
2:横梁两端架同时也采用&quot;液压锁紧装置&quot;，可进一步提高机台切割的稳定性，使板材的平整度和刀头使用寿命都有显著提高。<br>
3:横梁左右行走轨道采用台湾进口线性导轨，行走平行度高,切割时不抖动,受力时不上浮。有切割稳定性高，使用寿命长，易于更换等诸多优点。<br>
4:升降导柱与中座接触面采用表面轧制美国杜邦“聚四氟乙烯”聚合物材料的导套；导套表面轧制成圆形储油坑,在少油或间隙断油条件下能正常工作，具有摩擦系数低,耐磨性能好，使用寿命长等优点。<br>
5:电路系统采用PLC电脑控制系统，可任意设定切割方式、切割片数、厚度，以及下刀深度等等。所用电气元件采用进口优质电气原件及国内高精度零配件.<br>
LYQ-1800 Double locking bridge-type hydraulic pressure stone cutter<br>
<br>
This aircraft uses the great span crossbeam structure, overall frame weight; The crossbeam guide rail uses the import linear track; The fuselage fluctuation structure uses four column type hydraulic pressure fluctuation, simultaneously uses the patented technology: Column and marginal beam, when cutting has the hydraulic pressure locking arrangement, guaranteed when cutting the overall fuselage does not rock, the cutting efficiency is good, plate smoothness is high, is cuts the big specification high value to import the big blank the ideal equipment.<br>
1: The fuselage uses the patented technology &quot; the hydraulic pressure locking arrangement &quot;, in the machinery has in the attrition or the cutting process may reduce the fuselage gap, is advantageous in enhances the plate smoothness and the extension tool bit service life.<br>
2: The crossbeam two end frames simultaneously also use &quot; the hydraulic pressure locking arrangement &quot;, may further enhance the stability which the radio station cuts, causes the plate smoothness and the tool bit service life has the remarkable enhancement.<br>
3: About the crossbeam walks the track to use the Taiwan import linear guide rail, the walk parallelism is high, when cutting does not vibrate, when stress does not surface the boat. Has the cutting stability to be high, the service life is long, easy to replace and so on many merits.<br>
4: The fluctuation guide pillar and the middle stall contact face uses the superficial rolling US Dupont “the teflon” the polymer material guide sleeve; The guide sleeve surface rolling becomes the circular oil storage pit, in the few oils or the gap break under the oil condition to be able the normal work, has the friction coefficient to be low, the wear-resisting performance is good, service life long and so on merits.<br>
5: The circuitries use the PLC computer control system, may establish the cutting way, the cutting piece number, thickness willfully, as well as under knife depth and so on. Uses the electrical element to use the import high quality electricity original part and the domestic high accuracy spare parts.<br>