发布产品| 今日最新产品| 产品图片目录|产品推荐| 管理我的产品展厅
您的位置: 首页 > 产品展示 > 石材养护 > 粘胶 > 比利牌易朴士水质AB混
新疆康逸矿业有限责任公司 揭阳市鹏业石材实业有限公司 厦门宸石通建材有限公司 永华石材护理工具行 钟山县鑫福石业有限公司 福建南安水头康利德石材有限公司 长泰县长宏石材厂 平桂区黄田和兴石材厂

比利牌易朴士水质AB混合胶 

比利牌易朴士水质AB混合胶 
联系此供应商
关于 比利牌易朴士水质AB混合胶  的详细介绍:
比利牌易朴士水质AB混合胶 <br>
<br>
&nbsp;&nbsp;意大利比利公司经历了将近一个世纪的化工技术改良,**在比利公司第三代研制中的新产品已成功问世:易朴士AB水质混合胶。本品为二件装(A+B),水质透明状,它适用于云石、花岗石、水泥等,可用水稀释,有良好的加固和浸透力,对缝合细缝、小孔、裂痕效果尤佳。它能加强石质坚硬性,还有防水功能,而且不受温差影响,可用于低温环境。抛光后其粘合力及光亮度更佳。本品为全透明,是填充及缝合干净云石、花岗石的*佳产品。 <br>
<br>
&nbsp;&nbsp;使用方法:必须**石材表面污渍、硬痂、霉点等,使表面清洁、干燥。将等量的A和B倒入干净的罐中混合,然后涂在待处理的石材表面。如需要,可用抹刀或油扫均匀抹在整块石面上以填充细缝小孔和裂口。如果需处理部分石材,也可只涂抹在裂缝处。为防止反应过快,只需混合少量A和B。约190/250g(5/90z)够一次使用。混合后的液体在20C(68F)下有效时间为30-50分钟室温较低,有效时间增长;室温**则有效时间减短。使用后7-10小时要开始打磨。本品3-5天后**聚合,此时可用常规的研磨石料或钻头工具进行打磨、抛光。 <br>
<br>
实验指南:此产品可以加水50%-150%混合。喷或涂在朦面约30-60光的石面,它将慢慢地浸透入石材里面。数小时干后石面将起一种亮丽的效果。尤其是中东米黄、沙石类起光特别困难,此产品使用后,将会令你觉得意想不到的效果。火烧面涂上且又能起到亮丽的效果,同时又能防污防水功能。酒店大堂翻新使用本品尤佳。它能解决你的工程困难。如石质松花、小裂纹、小孔、光亮、防污、防水等问题。使用前建议小样试验石质效果。不用重新打磨,光度可达80%以上。 <br>
<br>
&nbsp;&nbsp;AQUAPOX <br>
<br>
&nbsp;&nbsp;AQUAPOX is the best water based product to fill and seal imperfections on clear marbles and granites. <br>
<br>
Application for Use: Marble, granite, terrazzo, engineered stones, sandstone, limestone, concrete floors and wall. <br>
<br>
&nbsp;&nbsp;Instruction for Use: Surface to be treated must be clean and dry; stains, mildew, crusting must be scraped off. Mix one part of “A” and one part of “B”. Mix two component into a clean tin, wait 2-4 minutes before the application in order to homogenize the mix, pour the content on the cracks. Apply only on the crack with a spatula on the entire slab if necessary to fill capillaries and cracks. Apply only on the crack if is necessary to fill only small quantities of product to avoid a very fast reaction. To make a good job is necessary approx 150/250gr(5/9oz.)for single mixing. The mix has a workable time of 30/35 minutes at 20’,the time will be longer at lower room temperature and shorter at higher room temperature. Grinding can be done after 7-10hours. Complete polymerization of the product will be after 3-5 days from application. Grinding and polishing can regular abrasive stones or diamond tools. Product is ready for use but can be diluted be done using up to 10% with pure water to fill low absorbent materials, when temperature are more then 30’or when used by spray gun. <br>
<br>
Coverage: For treatment of marble and granite with airline cracks or micro crack sit is possible to treat approximately 50-60sq. ft. (5200-600sq.ft.) with 2 kg of product (mix). Coverage in dependence of the materials absorption. <br>
 

手机访问